Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF

We teamed up with Supermicro to build a mid-range gaming PC based on the Intel Z490-powered C9Z490-PGW, and we're giving it away!

@TylerBernath
Published Tue, Nov 3 2020 1:51 AM CST   |   Updated Tue, Nov 3 2020 6:54 PM CST

Introduction

Back in July, we had the opportunity to have the Supermicro C9 Z490-PGW in the lab to put together an overclocking guide where we were able to successfully push our Intel® Core i9-10900K (learn more here) upwards of 5.2GHz all core at 1.35v without issue. It's now time to revisit that Supermicro Z490 and throw together a mid-range gaming build, tune it, and see with a few of our favorite benchmarks and how well it can handle 1080p high FPS and 1440p gaming.

The term "mid-range" is likely going to have a different meaning to you than it does me. Going into this build, my expectations are for this machine to handle 1080p gaming on most AAA titles somewhere between 120-150 FPS on moderate to high settings. This really shouldn't be an issue, but were are still in the middle of a pandemic, parts are hard to find, and product launches haven't gone well up to this point. That said, we won't be tapping the latest and greatest parts for this build, but instead a modest build to meet our goal.

Let's get to the hardware! Details on the giveaway are at the bottom of the page.

The Hardware

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 555 | TweakTown.com
VIEW GALLERY - 45 IMAGES
Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 01 | TweakTown.com

The beating heart of this entire build guide write-up is the Supermicro C9-Z490 PGW motherboard. This board offers some pretty high-end specifications for a gaming motherboard, starting with the Intel® Z490 chipset. A few features that stand out right away are four PCIe x16 slots that can operate in a 16/0/16/0 config or 8/8/8/8 if you need to populate all four. We have support for 2280 m.2 NVMe solutions on two slots and 10Gbe powered by the Aquantia AQC107. Rounding out the specifications, we have the usual USB 3.2 Gen 1 and 2 ports with a small gem hidden away in the details - the USB-C port tucked under the 10Gbe RJ45 on the back panel is USB 3.2 Gen 2x2, 20Gbps capable.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 07 | TweakTown.comSupermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 08 | TweakTown.com

Getting a quick look at the board, we have a simple dark aesthetic with several heat sinks covering the chipset and m.2 slots down below. The CPU VRM area is handled by larger finned stacks to dissipate heat more quickly. PCIe x16 slots are shielded, something that is becoming more and more common on boards designed for PCIe 4.0. The layout of the C9-Z490 is par for the course, 24-pin power sits to the right on the board and 8-pin CPU power at the top left. SATA and front panel connections are angled to the right for direct access from behind the motherboard tray; something system builders will enjoy.

A closer look at the CPU reveals we do have a flagship offering from Intel® on tap for this build guide; the Core i9-10900KF, so a big thanks to Intel® for supplying the CPU!

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 09 | TweakTown.comSupermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 15 | TweakTown.com

Both m.2 slots enjoy cooling from integrated heat sinks attached to the motherboard. Both of these integrated solutions come equipped with a thermal pad for installation.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 11 | TweakTown.comSupermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 12 | TweakTown.com

Wrapping up the motherboard, the memory slots also come shielded. This should aid in less cross path interference from components on the motherboard. In the second image, we have the accessories for the motherboard; I/O panel, Wi-Fi antenna, and SATA cables.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 13 | TweakTown.com

Our next bit of hardware is the SSD and memory. For this, we chose the 1TB variant of the ADATA SX8200 Pro, likely the best NVMe ADATA has ever made and one of the best PCIe 3.0 solutions available for sure. Hidden under the ADATA drive, we have our 16GB kit of Corsair Vengeance RGB Pro. I went with 3600MHz CL16 to keep with the mid-range theme of this build.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 16 | TweakTown.com

To keep our 10900KF cool, we tapped on the shoulder of Corsair and picked up the iCue H115i RGB Pro XT, a dual 140mm rad or 280mm solution that should have no issue handling the 125W TDP of our CPU.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 19 | TweakTown.comSupermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 21 | TweakTown.com

To power this system, we have the highly regarded 850W High Current Gamer from Antec; an 80Plus Gold rated supply that offers Japanese capacitors, and a fully modular design that's at peak 92% efficient. This is a single rail design offering 70A over the +12v rail and another 20A on both the 3.3 and 5v lines.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 22 | TweakTown.comSupermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 23 | TweakTown.com

EVGA answered the call when we needed a great looking pixel slinger; dropping a legit GeForce RTX 2070 Super Black on our doorstep.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 24 | TweakTown.com

Last, we needed a chassis to put all of these fantastic parts in, and I wanted to go with a platform that would have no restrictions on airflow for the best temperatures possible during long gaming sessions. For this, we chose the P82 Flow from Antec.

Buy at Amazon

Intel Core i9-10900KF 10 Core Desktop Processor

TodayYesterday7 days ago30 days ago
$579.99$579.99-
* Prices last scanned on 11/24/2020 at 5:39 pm CST - prices may not be accurate, click links above for the latest price. We may earn an affiliate commission.

The Build

The Build

Before we get into the build, we need to express our gratitude towards the vendors that helped put this system together. These include Supermicro, Intel®, Corsair, Antec, EVGA, and ADATA.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 25 | TweakTown.com

The build starts by installing the Corsair Vengenace Pro into the grey slots on the motherboard, locking in the bottom first, then the top.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 26 | TweakTown.com

The ADATA SX8200 Pro slides into the top m.2 slot on our motherboard. Removing the film from the thermal pad, we can get the heat sink attached.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 27 | TweakTown.com

I then moved to the power supply and prepped the Antec HCG with 24-pin, 8-pin, and PCIe power as the basics.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 28 | TweakTown.comSupermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 29 | TweakTown.com

I then tucked the High Current Gamer into its place under the motherboard; wires first. We then fastened the back with four screws supplied with the PSU. You can choose now if you want to use hybrid mode with the switch.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 30 | TweakTown.comSupermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 31 | TweakTown.com

Moving to the chassis, we prepped it to accept our Supermicro Z490 by installing the rear I/O plate and adding three stand-offs to the motherboard tray.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 32 | TweakTown.com

Board installed, we fasten it down as well using all nine spots available. We also flipped the chassis around and installed the backplate and retainers for the CPU cooler from Corsair.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 33 | TweakTown.com

Antec has a channel for securing wiring along this edge. We will use this for most of our wiring as it offers a void between levels to fit some of the thicker wires like the 24-pin cable.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 34 | TweakTown.com

Wiring will always be the first thing that's noticed when someone looks at your build, so we take a little more care in routing cables so that they look good. In this situation, the internal headers for both USB 3.0 and HD Audio were too short to route under the bottom tray. We improvised, running them through the bottom slot on the motherboard tray. The 24-pin cable slid in with no issues, and the 8-pin cable also, no problems making the connection.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 35 | TweakTown.comSupermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 36 | TweakTown.com

Mounting the Corsair AIO proved an issue up top. There was no clearance for fans before running tight against the memory. In this case, we opted to move the front intake fans and mount the rad upfront with fans first to pull air from outside. The OG intake fans now become top-mounted exhaust.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 37 | TweakTown.com

With the radiator mounted up front, I secured the block/pump with the included hardware. TIM used was Arctic MX4.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 38 | TweakTown.com

Last, we installed the RTX 2070 Super from EVGA, securing the card's power, ready for the first boot!

First Boot - Configuring the System

First Boot

First Boot

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 39 | TweakTown.comSupermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 52 | TweakTown.com

First boot, we head into the UEFI to configure XMP for the memory and let the system run for a few minutes, watching temperatures before we move into installing Windows 10 Pro.

Configuring the System

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 40 | TweakTown.com

The Windows 10 install took only a few minutes to our ADATA SX8200 Pro. From there, we boot back in and, thanks to the inclusion of the AX200 Wi-Fi 6, jump on the web to download drivers for the motherboard chipset and GPU.

Additionally, we grabbed the iCue software for the AIO and memory along with EVGA Precision X1 for the GPU and ADATA SSD Toolbox for the SX8200 Pro.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 41 | TweakTown.com

As mentioned, iCue would be set up to control the H115i and Vengeance RGB. With the software, you can configure fan speeds and RGB on the cooler, and RGB settings for the DRAM.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 42 | TweakTown.com

ADATA SSD Toolbox gives you insight into the SSD's life along with tools such as system optimization, which we did run to TRIM the SSD after everything was installed.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 43 | TweakTown.com

I picked up EVGA Precision X1 just in case we needed to tune / overclock the GPU to reach our performance goal. With the 10900KF for the CPU, we should have plenty of headroom on that side of things.

Tuning and Testing

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 45 | TweakTown.com

Starting our tuning phase, I wanted to check the SSD performance after the TRIM to see if it was where we expected it to be, and it was ~2900/2100 for sequential and ~60/125 for 4KQ1.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 46 | TweakTown.com

Moving into "gaming" testing, I chose Timespy and Shadow of the Tomb Raider for baseline performance. You can see our system specs are outlined in the screenshot above.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 47 | TweakTown.com

Baseline performance was run on an untouched system; I didn't even do any fan tuning to the GPU. This left us with 10220 on Timespy.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 48 | TweakTown.com

I setup Tomb Raider to our specification; 1080p with the High preset. We are right on par with our goals in this situation, but we will try to squeeze a touch more out by tuning the GPU.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 49 | TweakTown.com

Opening up Precision X1, I started tuning the GPU first by setting a more aggressive fan curve. We then dialed on 800 on the memory to get us to 7800MHz and an extra 150 to the core. The 2070 Super is known to handle +175-180 on some samples, so I thought this was a safe place to leave it. I also tuned the power target, moving it to 112%.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 50 | TweakTown.com

Tuning the GPU netted us about 870 points in Timespy.

Supermicro C9Z490-PGW Build Guide + Giveaway with Intel's 10900KF 51 | TweakTown.com

We were also able to pick up 11 FPS in Tomb Raider, a more comfortable average for this system.

Wrapping it up

I've built many systems in my lifetime, and I'm adding this build to my list as a success. I can be honest and say this was my first interaction ever with a Supermicro platform, and the C9-Z490 was a very easy motherboard to build with, and Intel made it even better with the 10900KF.

These two together meant we didn't need to overclock the processor at all to reach our goal of 120-150FPS at 1080p, and I'd hazard to say this machine could handle 1440p as well with solid framerates. That said, for anyone that does decide to build with this Supermicro platform, we have a very in-depth overclocking guide that will aid you in getting the most from your CPU.

The 2070 Super from EVGA did the heaviest lifting but was a solid card to pair with the 10900KF, especially with the current GPU market being so untamed. You can pick these cards up for $250 in some cases, and they are perfect for 1080p.

Rounding out the build, I chose 3600MHz for memory as it's a good medium between low-end JEDEC kits that run up to 2933 and the bleeding edge 5000MHz+ available on the market. Corsair's Vengeance RGB is as reliable a kit you will find and in our system ran without issue. We needed only a few clicks in the Supermicro UEFI to load XMP, and the memory was set. These kits are super cheap right now ~$90, making it a fantastic kit for a mid-range budget build.

The power supply should be one of the most important choices you make, and I went with the High Current Gamer from Antec because it's built and designed in partnership with Seasonic, one of the best names in the game - super reliable and clean power for our build. This pushes us to the Antec P82 Flow, an entry-level option that you can pick up for $70-80. It has tempered glass, which is all the rage, and has clean lines and amazing airflow, so I chose it. This case was fantastic to build in, with plenty of room to move cables and a decent amount of anchor points for cable ties.

Overall this is a solid machine, top to bottom, and there is room for this machine to grow when needed. The inclusion of the Z490 and 10900KF means we could likely take this up a notch with a better GPU. In the immediate future, this machine will push through hours of 1080p gaming like a boss!

For more information, please visit Supermicro.com.

Giveaway!

Want to win this awesome mid-range gaming PC powered by Supermicro and Intel? Read and follow the steps below. Entry is open to people from all countries.

How to Win

Disclaimer

This promotion is in no way sponsored, endorsed or administered by, or associated with Facebook or YouTube. You understand that you are providing your information to TweakTown and not to Facebook or YouTube. Information provided is only for selecting and contacting a winner. Your email address will be added to the TweakTown Newsletter if you decide to add it.

  • The giveaway runs from November 3, 2020 until November 17, 2020 at 3:00 pm GMT +10 - no entries will be taken into consideration after that time.
  • We will select winner(s) randomly using Fanpage Karma's "Good Luck Fairy" (https://www.fanpagekarma.com/facebook-promotion)
  • If you are a winner, you will be asked to provide your full name, address, and telephone number for shipping via Facebook message. These details will only be made available to the company participating in this giveaway. If you do not claim your prize within two weeks, it is forfeited.
  • For this weekly prize, anyone in the world can enter. You don't pay the shipping charges, but you are responsible for all taxes and / or duties.
Buy at Amazon

Intel Core i9-10900KF 10 Core Desktop Processor

TodayYesterday7 days ago30 days ago
$579.99$579.99-
* Prices last scanned on 11/24/2020 at 5:39 pm CST - prices may not be accurate, click links above for the latest price. We may earn an affiliate commission.
Newsletter Subscription
We openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion. If any company representative wishes to respond, we will publish the response here. Please contact us if you wish to respond.

Related Tags

Newsletter Subscription
Buyer Guides
Latest News
View More News
Latest Reviews
View More Reviews
Latest Articles
View More Articles